You have no items in your shopping Basket.

Filter by:

Clear All

BLB Blevers Crosstop Levers (Set) - Black

The BLB BLevers crosstop brake levers are elegant and simple.

The 22.2/23.8mm size is uniquely supplied with CNC’d alloy shims - these levers will suit any standard handlebar!
£22.00

BLB Blevers Crosstop Levers (Set) - Silver

The BLB BLevers crosstop brake levers are elegant and simple.

The 22.2/23.8mm size is uniquely supplied with CNC’d alloy shims - these levers will suit any standard handlebar!
£22.00

BLB Blevers Crosstop Levers (Set) - White

The BLB BLevers crosstop brake levers are elegant and simple.

The 22.2/23.8mm size is uniquely supplied with CNC’d alloy shims - these levers will suit any standard handlebar!
£22.00

BLB Blevers Crosstop OS Levers (Set) - Black

The BLB BLevers crosstop brake levers are elegant and simple.

The 31.8mm size is design to fit oversized handlebars!
£25.00

BLB Blevers Crosstop OS Levers (Set) - Silver

The BLB BLevers crosstop brake levers are elegant and simple.

The 31.8mm size is design to fit oversized handlebars!
£25.00

BLB Blevers Crosstop OS Levers (Set) - White

The BLB BLevers crosstop brake levers are elegant and simple.

The 31.8mm size is design to fit oversized handlebars!
£25.00

BLB CNC Lever (Single) - Blue

Super light and elegant CNC’d aluminium lever provides exceptional braking power.

Machined to exceptional tolerances the lever moves with unparalleled precision allowing for top quality modulation and control.
£32.99

BLB CNC Lever (Single) - Chrome

Super light and elegant CNC’d aluminium lever provides exceptional braking power.

Machined to exceptional tolerances the lever moves with unparalleled precision allowing for top quality modulation and control.
£32.99

BLB CNC Lever (Single) - Gold

Super light and elegant CNC’d aluminium lever provides exceptional braking power.

Machined to exceptional tolerances the lever moves with unparalleled precision allowing for top quality modulation and control.
£32.99

BLB CNC Lever (Single) - Matte Black

Super light and elegant CNC’d aluminium lever provides exceptional braking power.

Machined to exceptional tolerances the lever moves with unparalleled precision allowing for top quality modulation and control.
£29.99

BLB CNC Lever (Single) - Polished Black

Super light and elegant CNC’d aluminium lever provides exceptional braking power.

Machined to exceptional tolerances the lever moves with unparalleled precision allowing for top quality modulation and control.
£29.99

BLB CNC Lever (Single) - Red

Super light and elegant CNC’d aluminium lever provides exceptional braking power.

Machined to exceptional tolerances the lever moves with unparalleled precision allowing for top quality modulation and control.
£32.99

BLB CNC Lever (Single) - Silver

Super light and elegant CNC’d aluminium lever provides exceptional braking power.

Machined to exceptional tolerances the lever moves with unparalleled precision allowing for top quality modulation and control.
£29.99

BLB CNC Lever (Single) - White

Super light and elegant CNC’d aluminium lever provides exceptional braking power.

Machined to exceptional tolerances the lever moves with unparalleled precision allowing for top quality modulation and control.
£32.99

BLB TT-Lever (Single) - Black

These individually sold, lightweight and elegant time trial levers are available in alloy or super lightweight carbon (47.5g).

Compatible with any handlebars with 18-24mm internal bar diameter.
£23.99

BLB TT-Lever (Single) - Carbon

These individually sold, lightweight and elegant time trial levers are available in alloy or super lightweight carbon (47.5g).

Compatible with any handlebars with 18-24mm internal bar diameter.
£39.99

BLB TT-Lever (Single) - Silver

These individually sold, lightweight and elegant time trial levers are available in alloy or super lightweight carbon (47.5g).

Compatible with any handlebars with 18-24mm internal bar diameter.
£23.99

Paul Components Canti Levers (Set) - Black

Canti Levers are short pull brake levers for use with short pull brakes like cantilevers, centerpull brakes, and side pull caliper brakes. Their design balances comfort and weight without feeling flimsy in your hand.


They feature a very comfortable grip and an excellent feel. They also have a reach adjustment screw, an un-strippable clamp screw and Hollow Lite pivot pin.


The pivot features a lightweight hollow pin made of stainless steel and its large bearing surface and precise machining reduces play while allowing the lever to swing smoothly.

A 5mm set screw in the side of the lever perch allows you to adjust the reach, setting the distance from the bar to the lever to fit your hands.


Barrel adjusters are included for fine-tuning your brakes, and their oversized design and smooth shape makes it easy to adjust them by hand.
£117.00
Out of Stock

Paul Components Canti Levers (Set) - Silver

Canti Levers are short pull brake levers for use with short pull brakes like cantilevers, centerpull brakes, and side pull caliper brakes. Their design balances comfort and weight without feeling flimsy in your hand.


They feature a very comfortable grip and an excellent feel. They also have a reach adjustment screw, an un-strippable clamp screw and Hollow Lite pivot pin.


The pivot features a lightweight hollow pin made of stainless steel and its large bearing surface and precise machining reduces play while allowing the lever to swing smoothly.

A 5mm set screw in the side of the lever perch allows you to adjust the reach, setting the distance from the bar to the lever to fit your hands.


Barrel adjusters are included for fine-tuning your brakes, and their oversized design and smooth shape makes it easy to adjust them by hand.
£117.00
Out of Stock

Paul Components Cross Lever (Single) - Black

Cross Lever is an in-line brake lever designed for use on the flat upper section of drop handlebars. It can be used with short-pull or long-pull brakes and road bars.

By routing your existing brake cable and housing from your drop levers through the Cross Lever, you can have two sets of brake levers that allow you to control your speed from multiple hand positions.


Cross Lever fits onto the thicker stem clamp area of handlebars, and a hinged clamp allows for installation without needing to strip your bar tape.


Cross Lever can also be used on its own: Just let the head of brake cable sit in the recess for the housing on the outside of the lever. A barrel adjuster makes it easy to fine tune your cable tension.


Two versions are available to fit handlebars with a stem clamp area diameter of 26.0mm or 31.8mm. Additionally, the hinged clamp of a 26.0mm Cross Lever is designed in a way that also allows it to mount securely on handlebars with a 25.4mm diameter stem clamp area.


Fully CNC'd construction gives them a solid feel in the hand, and they are designed to work with any kind of brake. The Cross Lever is both a Short Pull and a Long Pull lever, depending upon the position of the adjustable pivot.


The levers come with their pivot pins in the hole closest to the handlebar. This location is for short pull brakes, like road calipers, centerpull cantilever brakes, and road mechanical disk brakes. Moving the pivot pin to the outer hole makes the levers compatible with long pull brakes, like Motolites, V-Brakes and mountain mechanical disk brakes.
£59.00

Paul Components Cross Lever (Single) - Silver

Cross Lever is an in-line brake lever designed for use on the flat upper section of drop handlebars. It can be used with short-pull or long-pull brakes and road bars.

By routing your existing brake cable and housing from your drop levers through the Cross Lever, you can have two sets of brake levers that allow you to control your speed from multiple hand positions.


Cross Lever fits onto the thicker stem clamp area of handlebars, and a hinged clamp allows for installation without needing to strip your bar tape.


Cross Lever can also be used on its own: Just let the head of brake cable sit in the recess for the housing on the outside of the lever. A barrel adjuster makes it easy to fine tune your cable tension.


Two versions are available to fit handlebars with a stem clamp area diameter of 26.0mm or 31.8mm. Additionally, the hinged clamp of a 26.0mm Cross Lever is designed in a way that also allows it to mount securely on handlebars with a 25.4mm diameter stem clamp area.


Fully CNC'd construction gives them a solid feel in the hand, and they are designed to work with any kind of brake. The Cross Lever is both a Short Pull and a Long Pull lever, depending upon the position of the adjustable pivot.


The levers come with their pivot pins in the hole closest to the handlebar. This location is for short pull brakes, like road calipers, centerpull cantilever brakes, and road mechanical disk brakes. Moving the pivot pin to the outer hole makes the levers compatible with long pull brakes, like Motolites, V-Brakes and mountain mechanical disk brakes.
£59.00

Paul Components Duplex Lever (Single) - Silver

The Duplex Lever is a single brake lever that pulls on two brake cables simultaneously.

It was originally designed for bike polo players, to allow them to use both brakes while swinging a polo mallet with their free hand. Since its introduction the Duplex has generated considerable excitement among adaptive cyclists as well.


TheDuplex Lever uses inline barrel adjusters that can be installed at any point along the brake cable housing. This keeps them safely out of the way of stray polo mallets without sacrificing adjustability.


The perch of the Duplex is symmetrical and allows it to be used as a left or right-handed brake lever by removing the pivot and flipping over the lever arm.

Additionally, the double pivot allows the Duplex to work with either long or short-pull brakes, just like the Cross Lever, by placing the pivot pin in the inner or outer pivot hole.


To use the Duplex with long-pull brakes like the Motolite or other side-pulls or V-brakes, place the pivot in the outermost hole. To use it with short-pull brakes like the Racer or other cantilever or caliper brakes, place the pivot in the inside hole.


A reach adjust screw can adjust how far the lever rests from the handlebar, putting it right where you want it.
£58.50

Paul Components E-Lever (Single) - Black

The E-Lever is a small single-finger, short-pull brake lever. It works with standard side-pull caliper, cantilever, and other short-pull brakes.


There’s something to be said for the clean looks of bare track handlebars, but riding brakeless can be hazardous on the road. The E-Lever is a tiny brake lever that keeps your handlebars looking clean while providing that extra braking power when needed.


Because of its compact design, the E-Lever has less leverage. For this reason we cannot recommend it for use as the sole method of braking. The E-Lever should only be used in conjunction with other brake mechanisms such as a fixed gear hub or coaster brake.


This lever is available in two clamp diameters to fit road and mountain handlebars. The 23.8mm version fits on the narrower grip section of road handlebars. The 22.2mm version fits standard mountain bike handlebars. There is an integrated barrel adjuster for quick adjustments.

£58.50

Paul Components E-Lever (Single) - Polished

The E-Lever is a small single-finger, short-pull brake lever. It works with standard side-pull caliper, cantilever, and other short-pull brakes.


There’s something to be said for the clean looks of bare track handlebars, but riding brakeless can be hazardous on the road. The E-Lever is a tiny brake lever that keeps your handlebars looking clean while providing that extra braking power when needed.


Because of its compact design, the E-Lever has less leverage. For this reason we cannot recommend it for use as the sole method of braking. The E-Lever should only be used in conjunction with other brake mechanisms such as a fixed gear hub or coaster brake.


This lever is available in two clamp diameters to fit road and mountain handlebars. The 23.8mm version fits on the narrower grip section of road handlebars. The 22.2mm version fits standard mountain bike handlebars. There is an integrated barrel adjuster for quick adjustments.

£80.99

Paul Components E-Lever (Single) - Silver

The E-Lever is a small single-finger, short-pull brake lever. It works with standard side-pull caliper, cantilever, and other short-pull brakes.


There’s something to be said for the clean looks of bare track handlebars, but riding brakeless can be hazardous on the road. The E-Lever is a tiny brake lever that keeps your handlebars looking clean while providing that extra braking power when needed.


Because of its compact design, the E-Lever has less leverage. For this reason we cannot recommend it for use as the sole method of braking. The E-Lever should only be used in conjunction with other brake mechanisms such as a fixed gear hub or coaster brake.


This lever is available in two clamp diameters to fit road and mountain handlebars. The 23.8mm version fits on the narrower grip section of road handlebars. The 22.2mm version fits standard mountain bike handlebars. There is an integrated barrel adjuster for quick adjustments.

£58.50

Paul Components Love Lever 2.5 (Set) - Black

The Love Lever is a lightweight long-pull brake lever designed for two-finger or three-finger operation and easy adjustment. The design balances comfort and weight without feeling flimsy in your hand. The 2.5 fits three fingers and its lever blade is about 20mm longer than the Compact model.


These levers are compatible with all long-pull cable operated brakes. They will work well paired with any v-brake, long-pull mechanical disc brake or any other long pull brake.


These levers are machined in house to exacting specifications. The pivot features a dual sealed cartridge bearing for the smoothest, stiffest brake lever you will ever use. Like all Paul components, these will be serviceable for a lifetime.


A 5mm set screw in the side of the lever perch allows you to adjust the reach, setting the distance from the bar to the lever to fit your hands.


Barrel adjusters are included for fine-tuning your brakes and their oversized design and smooth shape makes it easy to adjust them by hand, even wearing thick winter gloves.

£117.00

Paul Components Love Lever 2.5 (Set) - Silver

The Love Lever is a lightweight long-pull brake lever designed for two-finger or three-finger operation and easy adjustment. The design balances comfort and weight without feeling flimsy in your hand. The 2.5 fits three fingers and its lever blade is about 20mm longer than the Compact model.


These levers are compatible with all long-pull cable operated brakes. They will work well paired with any v-brake, long-pull mechanical disc brake or any other long pull brake.


These levers are machined in house to exacting specifications. The pivot features a dual sealed cartridge bearing for the smoothest, stiffest brake lever you will ever use. Like all Paul components, these will be serviceable for a lifetime.


A 5mm set screw in the side of the lever perch allows you to adjust the reach, setting the distance from the bar to the lever to fit your hands.


Barrel adjusters are included for fine-tuning your brakes and their oversized design and smooth shape makes it easy to adjust them by hand, even wearing thick winter gloves.

£117.00

Paul Components Love Lever Compact (Set) - Black

The Love Lever is a lightweight long-pull brake lever designed for two-finger or three-finger operation and easy adjustment. The design balances comfort and weight without feeling flimsy in your hand. The Compact fits two fingers and is about 20mm shorter than the 2.5 model.


These levers are compatible with all long-pull cable operated brakes. They will work well paired with any v-brake, long-pull mechanical disc brake or any other long pull brake.


These levers are machined in house to exacting specifications. The pivot features a dual sealed cartridge bearing for the smoothest, stiffest brake lever you will ever use. Like all Paul components, these will be serviceable for a lifetime.


A 5mm set screw in the side of the lever perch allows you to adjust the reach, setting the distance from the bar to the lever to fit your hands.


Barrel adjusters are included for fine-tuning your brakes and their oversized design and smooth shape makes it easy to adjust them by hand, even wearing thick winter gloves.

£117.00

Paul Components Love Lever Compact (Set) - Silver

The Love Lever is a lightweight long-pull brake lever designed for two-finger or three-finger operation and easy adjustment. The design balances comfort and weight without feeling flimsy in your hand. The Compact fits two fingers and is about 20mm shorter than the 2.5 model.


These levers are compatible with all long-pull cable operated brakes. They will work well paired with any v-brake, long-pull mechanical disc brake or any other long pull brake.


These levers are machined in house to exacting specifications. The pivot features a dual sealed cartridge bearing for the smoothest, stiffest brake lever you will ever use. Like all Paul components, these will be serviceable for a lifetime.


A 5mm set screw in the side of the lever perch allows you to adjust the reach, setting the distance from the bar to the lever to fit your hands.


Barrel adjusters are included for fine-tuning your brakes and their oversized design and smooth shape makes it easy to adjust them by hand, even wearing thick winter gloves.

£117.00

Ridea TH CNC Lever (Single) - Black

Ridea pride themselves on developing the highest quality products and that can be seen throughout the entire range, even into every last detail of the new Ridea TH CNC Brake Lever.


Not only does it look the part but it is fully machined from 7075 alloy, this not only creates the lever to be both stiff and strong for ultimate pulling power but also weigh as light as a feather at only 35g!!


Available with 25.4mm clamp (supplied with 22.2 + 23.8mm shims).

£75.00

Ridea TH CNC Lever (Single) - Silver

Ridea pride themselves on developing the highest quality products and that can be seen throughout the entire range, even into every last detail of the new Ridea TH CNC Brake Lever.


Not only does it look the part but it is fully machined from 7075 alloy, this not only creates the lever to be both stiff and strong for ultimate pulling power but also weigh as light as a feather at only 35g!!


Available with 25.4mm clamp (supplied with 22.2 + 23.8mm shims).

£75.00

Ridea TH CNC OS Lever (Single) - Black

Ridea pride themselves on developing the highest quality products and that can be seen throughout the entire range, even into every last detail of the new Ridea TH CNC Brake Lever.


Not only does it look the part but it is fully machined from 7075 alloy, this not only creates the lever to be both stiff and strong for ultimate pulling power but also weigh as light as a feather at only 35g!!


Available with 31.8mm clamp.

£75.00
Scroll To Top