Close
Search
£
You have no items in your shopping Rack.
Search
SKU: BRPF0137

Paul Components Racer Medium Front Brake - Black

£128.50
+ -
Customers who bought this item also bought

Paul Components Funky Monkey Front - Black

The Funky Monkey Front is a simple hanging cable stop for front centerpull and cantilever brakes.


Three clamp sizes are available to work with threaded or threadless headsets. The 1 1/8” Funky Monkey works great with threadless headsets, clamping to the steerer tube between the stem and upper headset bearing.

The 7/8” version clamps onto the lower portion of quill stems installed in threaded headsets, and the 1” inch version can clamp to 1” threadless steerer tubes or 1” quill stems.

£47.00

Paul Components Racer Medium Rear Brake - Black

Following on the heels of the successful Racer is the leaner, meaner, racier Racer Medium. It's got fantastic stopping power and thanks to the very stiff and short arms it modulates that power better than any brake.


Racer Medium features an additional bridge piece that runs between the pivots and allows the Racer Medium to mount to frames with a single brake mounting hole above the tire. The option is given for a shorter recessed bolt to work with modern frames. In this setup the Racer Medium is a medium reach brake with a range of 47 to 57mm.


The Racer Medium come with all necessary hardware: mounting bolts, straddle wire, cable carrier, and a pair of salmon Koolstop Thinline brake pads.


Between the arms there is enough clearance to fit a 45mm fender and a 32mm wide tire. We think this is a perfect combination for an all-around do-everything road bike if there ever was one. As a bonus, the brake will not pinch the side of the fender like dual pivot brakes do.


All Paul Component brakes are sold individually.
£128.50

Ass Saver Regular - Black

Wether you commute to work or race in the UCI World tour, the Ass Saver Regular will keep your butt dry and dramatically increase the comfort on cold and wet rides.


The latest Ass Saver sports the new FLIP-TIP™ attachment system. Once fitted, simply fold up the tip of the Ass Saver and it will securely lock to the saddle rails.


Have no doubt, The fourth generation of Ass Savers is your new best friend. Easy to hook up with, never being a burden and always there to cover your back, no matter what.

£6.95

Paul Components Racer Front Brake - Black

The Racer brake is a centerpull caliper brake with long reach arms and plenty of clearance.

Based on the classic Mafac centerpull, the Racer brake has been updated with modern materials and manufacturing. The long reaching arms are CNC machined with a T-shaped profile that makes them very stiff. The widely spaced pivots that make room for larger tires and full-coverage fenders. Kool Stop brake pads with spherical washers and sealed pivots with adjustable spring tension round out this fine brake.


The Racer was originally designed to mount directly to the frame via centerpull brake bosses. When a Braze-On Racer is mounted to these specially positioned centerpull brake bosses the brake is especially stiff, weighs less and has a simple integrated appearance.


It is important to note that the Braze-On Racer does not mount to brake bosses in the standard cantilever position, and it will not work with U-brake bosses. Reach is determined by the height of the centerpull brake bosses, which can be positioned by a framebuilder to match up with 700c, 650b, or 26" wheels.


The Center Mount Racer is a long reach brake, and has 57mm to 67mm of reach (when measured diagonally from the centermount to the top of the brake pad). This works great on frames designed for long reach brakes, and can convert frames designed for 27" wheels to 700c, or 700c to 650b.


All Paul Component brakes are sold individually.
£128.50