Close
Search
£
You have no items in your shopping Rack.
Search

Paul Components Funky Monkey Front - Silver

£47.00
+ -
Customers who bought this item also bought

Paul Components Funky Monkey Rear - Silver

The Funky Monkey Front is a simple hanging cable stop for front centerpull and cantilever brakes.


Rear version of Funky Monkey can be mounted on a seatpost or on the seat tube. It has a hinged arm to self-align for the proper cable angle.

It also have a barrel adjuster to make brake cable adjustments quick and painless.

£58.00

Velocity A23 - 700c - Black MSW

With a wider footprint, the A23 allows for a more aerodynamic rim/tire combination when paired with a 23c tire.


The tire profile mimics the characteristics of a tubular, gaining increased control and lower rolling resistance without the inconvenience of tubular glue or the dangers of irreparable roadside mechanicals. New design makes this rim ideal for road and cyclocross applications.


Tight tolerances require the use of a low profile rim tape like Velotape to avoid tire installation issues. Veloplugs are not recommended on A23 or A23 OC rims.

£59.99

Paul Components Touring Cantilever Brake - Polish

The Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.


The narrower profile of the Touring Canti can be desirable if you're riding with large panniers or if your current brakes don't give you enough heel or calf clearance. The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.

The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine tuned thanks to the spherical washers on the brake pads' threaded posts.


Like all of Paul Components brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you're riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.


The Touring Canti comes with pivots pre-greased and with all necessary hardware.


All Paul Component brakes are sold individually.
£128.50

Paul Components Touring Cantilever Brake - Silver

The Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.


The narrower profile of the Touring Canti can be desirable if you're riding with large panniers or if your current brakes don't give you enough heel or calf clearance. The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.

The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine tuned thanks to the spherical washers on the brake pads' threaded posts.


Like all of Paul Components brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you're riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.


The Touring Canti comes with pivots pre-greased and with all necessary hardware.


All Paul Component brakes are sold individually.
£101.00