Sale

The spokes are at a special 90° bend and butted, meaning they are stronger than a standard spoke. Pro-Lite also use washers made with a special material against the hub flange so the spokes fit flush and this reduces lost power.

The spokes are at a special 90° bend and butted, meaning they are stronger than a standard spoke. Pro-Lite also use washers made with a special material against the hub flange so the spokes fit flush and this reduces lost power.

The spokes are at a special 90° bend and butted, meaning they are stronger than a standard spoke. Pro-Lite also use washers made with a special material against the hub flange so the spokes fit flush and this reduces lost power.

The Garda uses two types of bearings in the rear hub. One cartridge bearing on the non-drive side complements two high quality Cup and Cone bearings in the freehub. Replaceable ball bearings offer incredible longevity and impressive smoothness, while the cartridge bearings offer easy replacement. Together, the three bearings provide a stable feel and improve power transfer, especially for sprinting and climbing.

Made on Pro Lites very own high-pressure vacuum forming machine, the Gavia Caliente combines incredible light-weight with characteristic Pro-Lite strength. A new rim profile provides improved heat resistance and removes the need for offset brake pads.

Please note that this is an ex-display wheelset.

The Padova features a 2-in-1 hub which allows a 'hot swap' between a road type free body and a track type axle with a fixed gear in around a minute with simple tools. All necessary hardware is included.

Additionally, the lateral rigidity is extremely high to let you have total control in tight corners and exceptional response on out-of-the-saddle sprints. What else makes it special? How about virtually zero maintenance. No spokes. No tension adjustments. Just straight up strength and rigidity.
It's perfect for road or track.

Made on Pro-Lite very own high-pressure vacuum forming machine, the carbon portion of the CA50 brings light weight and strength to mix with the convenience and heat-dissipation of a flash-welded alloy clincher.

Vicenza series wheels have a useful 2 in 1 "hot swap" hub that lets the rider switch from road to track in less than one minute. The wheel is supplied with all the parts necessary for both road and track setups.

Made on Pro-Lite very own high-pressure vacuum forming machine, the carbon portion of the CA90 brings light weight and strength to mix with the convenience and heat-dissipation of a flash-welded alloy clincher.

Vicenza series wheels have a 2 in 1 hub that lets the rider switch from road to track in a matter of seconds. The wheel is supplied with all the parts necessary for both road and track setups.

The 6 degree drops means you can set it to be flat or have it rise up a bit for that more alert position when riding in heavy traffic.

Please note that these spokes may not fit spoke holes on all hubs, so please ensure that your hub is compatible with bladed spokes.

BLB bladed spokes supplied with 12mm brass nipples. 1 packet includes approximately 744g of spokes and nipples - this equates to between 140 and 150 spokes depending on length.

Please note that these spokes may not fit spoke holes on all hubs, so please ensure that your hub is compatible with bladed spokes.

BLB bladed spokes supplied with 12mm brass nipples. 1 packet includes approximately 744g of spokes and nipples - this equates to between 140 and 150 spokes depending on length.

Supplied with BLB quality Leather Binding Patch (pair). A must for anyone who keeps tearing their straps!

The BLB Notorious 03 is a carbon clincher tri-spoke wheel with an alloy braking surface. Rolling on smooth sealed bearings for minimal resistance and twinned with its aerodynamic profile for low levels of wind resistance.

The Notorious 03 are produced using the most advanced carbon technology for maximum rigidity, lightweight and performance.

Following the demand for high-end, carbon ’fast’ wheels and rims in 2012 we developed a new line: Notorious BLB.

BLB Notorious 90 – our signature 3K tough carbon weave deep section clincher rims, suitable for urban riding!

Please note that Notorious 90 carbon rim require BLB Valve Extender.

All tyres are sold individually.

Plain gauge 14G spokes supplied with 12mm brass nipples. 1 packet includes approximately 744g of spokes and nipples - this equates to between 140 and 150 spokes depending on length.

Plain gauge 14G spokes supplied with 12mm brass nipples. 1 packet includes approximately 744g of spokes and nipples - this equates to between 140 and 150 spokes depending on length.

Plain gauge 14G spokes supplied with 12mm brass nipples. Coloured stainless steel spokes are powder coated ensuring super fresh colours and maximising strength.

1 packet includes approximately 744g of spokes and nipples - this equates to between 140 and 150 spokes depending on length.

Plain gauge 14G spokes supplied with 12mm brass nipples. Coloured stainless steel spokes are powder coated ensuring super fresh colours and maximising strength.

1 packet includes approximately 744g of spokes and nipples - this equates to between 140 and 150 spokes depending on length.