Customers who bought this item also bought
Cross Lever is an in-line brake lever designed for use on the flat upper section of drop handlebars. It can be used with short-pull or long-pull brakes and road bars.
By routing your existing brake cable and housing from your drop levers through the Cross Lever, you can have two sets of brake levers that allow you to control your speed from multiple hand positions.
Cross Lever fits onto the thicker stem clamp area of handlebars, and a hinged clamp allows for installation without needing to strip your bar tape.
Cross Lever can also be used on its own: Just let the head of brake cable sit in the recess for the housing on the outside of the lever. A barrel adjuster makes it easy to fine tune your cable tension.
Two versions are available to fit handlebars with a stem clamp area diameter of 26.0mm or 31.8mm. Additionally, the hinged clamp of a 26.0mm Cross Lever is designed in a way that also allows it to mount securely on handlebars with a 25.4mm diameter stem clamp area.
Fully CNC'd construction gives them a solid feel in the hand, and they are designed to work with any kind of brake. The Cross Lever is both a Short Pull and a Long Pull lever, depending upon the position of the adjustable pivot.
The levers come with their pivot pins in the hole closest to the handlebar. This location is for short pull brakes, like road calipers, centerpull cantilever brakes, and road mechanical disk brakes. Moving the pivot pin to the outer hole makes the levers compatible with long pull brakes, like Motolites, V-Brakes and mountain mechanical disk brakes.
High quality brake outer cable in a selection of bright colours, a perfect aftermarket product for pimping up a bike!
Each package contains 2.5M of coloured brake outer cable and 4 cable ends.
Ridea pride themselves on developing the highest quality products and that can be seen throughout the entire range, even into every last detail of the new Ridea TH CNC Brake Lever.
Not only does it look the part but it is fully machined from 7075 alloy, this not only creates the lever to be both stiff and strong for ultimate pulling power but also weigh as light as a feather at only 35g!!
Available with 25.4mm clamp (supplied with 22.2 + 23.8mm shims).
High quality MTB brake cable.